TITLE: 12/29 Day Shift: 16:00-00:00 UTC (08:00-16:00 PST), all times posted in UTC
STATE of H1: Observing at 150Mpc
OUTGOING OPERATOR: TJ
CURRENT ENVIRONMENT:
SEI_ENV state: CALM
Wind: 5mph Gusts, 4mph 5min avg
Primary useism: 0.07 μm/s
Secondary useism: 0.65 μm/s
QUICK SUMMARY:
H1 has been Locked and observing for 11 hours and 35 minutes!
New CDS_Overview indicator H1EDC error points to nuc26 having 12 channels with out a connection for some reason.
H1:CDS-MONITOR_NUC26_CPU_LOAD_PERCENT
H1:CDS-MONITOR_NUC26_CPU_COUNT
H1:CDS-MONITOR_NUC26_MEMORY_AVAIL_PERCENT
H1:CDS-MONITOR_NUC26_MEMORY_AVAIL_MB
H1:CDS-MONITOR_NUC26_PROCESSES
H1:CDS-MONITOR_NUC26_INET_CONNECTIONS
H1:CDS-MONITOR_NUC26_NET_TX_TOTAL_MBIT
H1:CDS-MONITOR_NUC26_NET_RX_TOTAL_MBIT
H1:CDS-MONITOR_NUC26_NET_TX_LO_MBIT
H1:CDS-MONITOR_NUC26_NET_RX_LO_MBIT
H1:CDS-MONITOR_NUC26_NET_RX_ENO1_MBIT
H1:CDS-MONITOR_NUC26_NET_TX_ENO1_MBIT
It seems like these are monitors for this particular computer.
nuc26 (upper camera FOM) froze up at 07:10 PST this morning. It was unresponsive on the network, Tony rebooted it via its reset button and it is running again. The EDC reconnected to its epics_load_mon channels soon after it was restarted.
Yesterday we noticed the H2 building DTS temperature was getting close to 80F. Tony reset the HVAC thermostats first at 09:50 Thursday morning, and then a second time at 15:20 Thursday afternoon. The second reset did the trick and the system is regulating again. 24 hour trend attached.