Dave, Erik, Camilla, Jonathan, During a lock loss Jonathan went to EY and got the network interface configured. This was enough to get the machine back on the network. When the machine was replaced yesterday the camera was plugged into the wrong slot on the pci board, this was fixed as well. Dave, Erik, and Camilla remotely activated and tested the camera. Some notes: * During an iteration of work inside, go outside for cell phone reception something in the door mechanism to EY got stuck and it would not open despite being set to unlocked by the operator and by a key fob. After many tries it eventually opened. * Since the re-keying there is no key in the lock box.
Before the HWS ETMY IOC was started on h1hwsey, I stopped the simulation IOC which had been running on cdsioc0.
This was running under systemd control as h1hwsetmy_dummy_ioc.service. I have stopped and disabled this service.
h1tcshwssdf was restarted a few times this afternoon as ETMX and ETMY HWS IOCs came and went.
Camilla started the camera control code for ETMY.