Following the WD trips of ITMX ISI and ETMX SUS, ISI, and HEPI on the previous shift, I was able to recover by using the oplevs to bring the position of ITMX and ETMX back to after the last initial alignment and started locking. I paused at CHECK_VIOLINS_BEFORE_POWERUP to damp violins with 2W settings as they were still rung up. After an hour of damping, I continued lock acquisition and made it to OMC_WHITENING without issue. H1 has been here for just over 1.5 hours damping violins at full power and progress is slow. H1_MANAGER is active so H1 should move to observing once violins have been damped down far enough.