Mechanical

• Alignment check: Confirm if the current mechanical Pitch/Yaw of OMC3 and OMCS are sufficient. -> (If not, touch OMC3 and OMCS more)
• Check the bias values of OMC1/2/3 and OMCS ->(Do we need any debias?)
• Check if the OSEM DC values shows the light close to half shadowed.
• Check if the TFs of the OMC1/2/3 and OMCS are still acceptable.
• Adjust the WFS / OMCR paths
• Restore the shroud panels
• Restore the OMC trans beamdump

Electrical tests:

• PZT1 test
• Fast Shutter functionality/delay time test