Marc, Oli, Dave:

For Marc's change over to a bigger +24V power strip in the OAF/TCS CER rack, I powered down the h1oaf0 frontend to permit its IO Chassis to be power cycled.

Sequence was

• h1oaf0 model SDF diffs captured (see attachments)
• h1oaf0 models stopped
• h1oaf0 fenced from Dolphin fabric
• h1oaf0 computer powered down 11:58 PST
• Marc in CER powered off IO Chassis and Beckhoff chassis, rerouted power cords to new strip, powered chassis back on.
• h1oaf0 computer powered up, models started.
• I did a CDS overview cleanup, reset IPC errors and DAQ CRC errors.

All is looking good from a CDS perspective.