Displaying report 1-1 of 1.
Reports until 14:21, Wednesday 28 August 2013
H1 AOS
richard.savage@LIGO.ORG - posted 14:21, Wednesday 28 August 2013 (7564)
H1 Laser Area Enclosure temperature changes transitioning from
Last night, Christina Bogan transitioned to "Science Mode" in which all non-essential heat sources, lights, HVAC fans, etc. are shut down for her PSL characterization measurements at about 8PM.

The attached plot (20 hours) shows the temperature transient that resulted.  Note that two significant heat sources, the TTFSS and the ISS AOM driver reside at the south end of the table.

To reduce the magnitude of the transient, we will try operating the room in Commissioning Mode at 4 to 5 deg. F higher temperature.
Images attached to this report
Displaying report 1-1 of 1.