ETMx Silica-tipped Earthquake Stops Positioned on Quad (Andres, Corey)
The face EQ stops for the ETMx needed to be positioned, but we don't want "glass on glass" contact. We didn't have thin teflon strips to insert between the EQ stops and the glass, so per Betsy's suggestion, we used Alpha Wipes as a buffer between the Stops & Glass.
SUS TMS Cable Fixed
Installed screws on an in-vac cable which had these screws missing from its connector. All TMS cables are good to go for dressing on the ISI.
Note, the above states that the face stops were adjusted to clamp the ETMx - from afar, I have clarified with Andres that indeed all of the appropriate barrel stops are actua;;y doing the clamping as I had prescribed for SEI balancing work.