Jenne D,  Jennie W

Jenne noticed that our AS_A_YAW offset was on in the current state (PREP_FOR_LOCKING). We don't want this offset on currently as we are moving to a different spot on the OFI for which we need the picomotors, therefore we my need to rethink AS_A and B alignment offsets.

We turned this offset and the other AS_A and AS_B oiffsets off.

This is the only one I could find set in the ISC_LOCK guardian so I commented this line out.

        elif self.counter==9 and self.timer['LoopShapeRamp']:
            #ezca['ASC-AS_A_DC_YAW_OFFSET'] = -0.15 J Wright commented this out on 6th June 2024.
            ezca.switch('ASC-AS_A_DC_YAW', 'OFFSET', 'ON')

I reloaded the ISC_LOCK guardian.