J. Kissel
WP 11969

The attached screenshot shows the MEDM screen interface for the new routing of the h1iopomc0's ADC0 signals reading out copies of the OMC DCPD A and B ADC voltage at 524 kHz (see discussion of front-end -model implementation in LHO:78956). 
From the sitemap, pull down the "OMC" menu (circled in neon green) and select a new screen link "DCPD TEST" (arrow-ed in magenta)
That opens up the black overview screen which shows the ADC input matrix and the link to the filterbanks (circled in light blue).
That link opens up the screen on the far right of screenshot which displays
    - read only versions of the primary DCPD A0 and B0 524 kHz banks.
    - read only version of the PI DOWNCONV SIG filter 524 kHz bank.
    - The new A1, B1, and A2, B2 filter banks.

You can see these screens are already populated in the configuration I want to test first. These settings are all initialized, monitored, and accepted in the SDF settings.