If the IFO is locked and thermalized when the normal calibration measurement time rolls around today, please do the following before moving to ISC_LOCK state 700 (NLN_CAL_MEAS):


caput H1:CAL-PCALY_PCALOSC1_OSC_SINGAIN 0 
caput H1:CAL-PCALY_PCALOSC2_OSC_SINGAIN 0 
caput H1:CAL-PCALY_PCALOSC3_OSC_SINGAIN 0
caput H1:CAL-PCALY_PCALOSC4_OSC_SINGAIN 0
caput H1:CAL-PCALY_PCALOSC9_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC1_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC1_OSC_COSGAIN 0
caput H1:CAL-PCALX_PCALOSC4_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC5_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC6_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC7_OSC_SINGAIN 0
caput H1:CAL-PCALX_PCALOSC8_OSC_SINGAIN 0


then follow the normal calibration procedure at https://cdswiki.ligo-wa.caltech.edu/wiki/TakingCalibrationMeasurements.

then go back to NLN. 

Then after going back to NLN (state 600) 


caput H1:CAL-PCALY_PCALOSC1_OSC_SINGAIN 115 
caput H1:CAL-PCALY_PCALOSC2_OSC_SINGAIN 5000 
caput H1:CAL-PCALY_PCALOSC3_OSC_SINGAIN 5000
caput H1:CAL-PCALY_PCALOSC4_OSC_SINGAIN 1430
caput H1:CAL-PCALY_PCALOSC9_OSC_SINGAIN 3619
caput H1:CAL-PCALX_PCALOSC1_OSC_SINGAIN 30000
caput H1:CAL-PCALX_PCALOSC1_OSC_COSGAIN 30000
caput H1:CAL-PCALX_PCALOSC4_OSC_SINGAIN 40
caput H1:CAL-PCALX_PCALOSC5_OSC_SINGAIN 30
caput H1:CAL-PCALX_PCALOSC6_OSC_SINGAIN 30
caput H1:CAL-PCALX_PCALOSC7_OSC_SINGAIN 60
caput H1:CAL-PCALX_PCALOSC8_OSC_SINGAIN 2000





This is to facilitate a test for the gstlal pipeline. I will get something similar into guardian before the next calibration measurements.