[Jeff B, Stuart A] After a few power glitches etc, the triple test-stand was in need of some attention prior to hooking-up OMC suspensions for Phase 1b testing. Logging in remotely, I noticed that the incorrect model was running, x1sushxts27 instead of x1sushxts05, so I re-started the *05 model. I then BURT restored the safe snapshot (/opt/rtcds3/tst/x1/userapps/release/sus/x1/burtfiles/20130911_x1sushxts05_OMC.snap) I had already previously taken of the OMC configuration (see LHO aLOG entry 7728 for further details). The triple test-stand should now be ready to accept OMCS for testing.