stefan.ballmer@LIGO.ORG - posted 15:21, Tuesday 08 October 2013 (8051)
Enable and Run jumpers installed on coild drivers for RM1, RM2, OM1, OM2, OM3
(Rich, Stefan) We installed jumpers in the coil drivers (D1100117) to permanently enable input on/off switch and the run switch. The affected the following coil driver serial numbers: S1106044 (RM1), S1200612 (RM2), S1106043 (OM1), S1200608 (OM2), S1200614 (OM3) For proper operation H1:ASC-RM2_BIO_M1_STATEREQ needs to be set to 2, and the anti-dewhitening filters need to be in FM6 of the H1:ASC-RM?_M1_COILOUTF_?? filter modules. (FM1 is reserved for the sim-dewhitenig filter.)