alexan.staley@LIGO.ORG - posted 16:18, Thursday 10 October 2013 (8080)
MCL PZT Controller
MCL C02219: EX Table PZT 2, NB85-AR10 (to be replaced)
MCL C02218: EX Table PZT1, ND2-AR10-ISS
| Input (V) | Sensor (V) | HV/10 (V) | |
| x | 0 | 0 | -0.06 |
| y | 0 | 0 | -1.97 |
| x | 10 | 10 | 9 |
| y | 10 | 10 | 9.89 |
| x | -10 | -2.7 | -1.78 |
| y | -10 | -3 | -1.79 |
MCL C02718: EY Table PZT 2
| Input (V) | Sensor (V) | HV/10 (V) | |
| x | 0 | 0 | -0.06 |
| y | 0 | 0 | -1.97 |
| x | 10 | 10 | 11.08 |
| y | 10 | 10 | 10.22 |
| x | -10 | -2.5 | -1.705 |
| y | -10 | -4.9 | -1.653 |
MACL C02722: EY Table PZT 1 (test previously and seen similar results to MCL C02718)
The three PZT's (two on EY, one on EX) have a range from 0 to 10V. Another 0 to 10 V will be placed on EX. Important note: the controller must be hooked up to it's respective PZT in order to be properly tested.