WP12150 Replace EY DNS-II GPS receiver power supply

Erik, Fil:

The power supply for the CNS-II GPS receiver was replaced. Erik found that the unit needs to be unplugged for at least 30 seconds or it doesn't initialize correctly.

WP12123 Install python3 alarms system as production

Dave:

The new python3 alarm code, which also uses Twilio for cell texts, was installed as the production code on cdslogin.

WP12145 h1guardian1 reboot

Erik, Jonathan, TJ:

h1guardian1 was rebooted to test the new boot drive which was installed recently. Please see Erik's alog for more details.

WP12151 Correcting missing channels in SDF snap files

Dave:

h1susitmpi's OBSERVE.snap was missing 4 channels. Since its settings were identical to those in safe.snap, OBSERVE.snap was changed to be an identical symlink as safe.snap

lrwxrwxrwx 1 controls advligorts 65 Oct 22 10:11 OBSERVE.snap -> /opt/rtcds/userapps/release/sus/h1/burtfiles/h1susitmpi_safe.snap
lrwxrwxrwx 1 controls advligorts 65 May  2  2016 safe.snap -> /opt/rtcds/userapps/release/sus/h1/burtfiles/h1susitmpi_safe.snap
 

The HEPI models h1hpietmy, h1hpiham4, h1hpiham5 and h1hpiham6 had safe.snap files were all missing the same 9 channels (see attachment).

These channels were added to the safe.snap files. To test, each models' SDF was transitioned from OBSERVE to safe and back to OBSERVE.