Today's major activity was the installation of the Cartridge into BSC3.  This started roughly late morning and was completed by 2:30-ish. 

Other Activities Of The Day:

Doug tried taking measurements to look at BSC3 in the morning (but wasn't able to due to interferences)

Work on X1:  Ed Watt removing insulation & inspection (not sure if this started today...they had mask-fittings in the morning and then they need to set up lighting to begin work)

Waiting to hear back from ISC regarding EX work (mentioned in morning meeting).

Dust Monitor continue to exhibit "noisy" behavior and alarm quite a bit due to a "step up" in counts (noted by Patrick & Jeff B.) coinciding with software change last Tues.  Unless something is changed, may be worth it to change alarm levels on these guys (I'll be on shift again on Thurs, and change levels if situation doesn't improve).

HAM2/3 ISI going up & down (Arnaud & kissel)

Contractor here to service tanks at 9:21am

Purge Air check at EX & LVEA (Gerardo)

Working with FSS (Stefan after talking with Rick)

Testing Oplev/Pcal templates (Rick/Craig)