Closes FAMIS#28454, last checked 80607
CO2 trends looking good (ndscope1)
HWS trends looking good (ndscope2)
You can see in the trends when the ITMY laser was swapped about 15-16 days ago.
Trend shows that the ITMY HWS code stopped running. I restarted it.
Erik, Camilla. We've been seeing that the code running on h1hwsmsr1 (ITMY) kept stopping after ~1hours with a "Fatal IO error 25" (Erik said related to a display) attached.
We checked that memory is fine of h1hwsmsr1. Erik troubleshooted this back to matplotlib trying to make a plot and failing as there was no display to make the plot on. State3.py calls get_wf_new_center() from hws_gradtools.py which calls get_extrema_from_gradients() which makes a contour plot, it's trying to make this plot and thinks there's a display but then can't plot it. This error isn't happening on h1hwsmsr (ITMX). I had ssh'ed into h1hwsmsr1 using -Y -C options (allowing the stream image to show), but Erik found this was making the session think there was a display when there wasn't.
Fix: quitting tmux session, logging in without options (ssh controls@h1hwsmsr1), and starting code again. The code has now been running fine for the last 18 hours.
