With the IFO down due to an earthquake, went out to the LVEA to verify installation and location of the Picomotor Driver E. This controller was slotted for Optical Lever but never implemented.

Control and readback cables are connected to the Corner 2 Slow Controls Chassis (D1100680) in the CER. Cables labeled H1:IO_305 and H1:IO_306 are connected in slot 5 on the rear of the chassis. Cables are routed to the HAM6 ISC racks. No driver is installed in the LVEA. Cables are disconnected and coiled up in the cable tray.