Stefan has installed ODC MASTER (running on h1oaf0), ODC X (running on h1iscex) and ODC Y (running on h1iscey) for H1.  The MASTER will be used to summarize the ODC information from the corner station ODC channels.  The X will be used for the X end, and the Y for the Y end.  

Stefan has also generated MEDM screens that are available under the sitemap by following: ASC > ODC site overview.  The output channels are displayed at this level, and further details may be seen by digging into the yellow buttons labeled MASTER,Y or X.  

We are filling out the bit labels and setting up the bitmasks needed to compute the summary information, once IPC connections are added.  For now, we also have EPICs parts in place to simulate the signals that would be sent from the subsystem ODCs.