As per WP 12314 we did work towards installing new digital video controller computers.

In the morning Jonathan Hanks and Austin Farias installed a new switch (sw-msr-video1) in the video rack.  This switch is a 10g fiber switch and will be used to carry the camera lan traffic to the new h1digivideo computers.

In the afternoon Dave removed some of the old conlog computers to make room for h1digivideo4.

In the afternoon Dave/Jonathan/Patrick installed h1digivideo4, ran fiber from it to sw-msr-video1.  Then we installed the OS via a PXE boot and preseed.  H1digivideo has been added to puppet to get the config in place.  Jonathan and Patrick installed a test camera in the MSR (cam-msr-test) on the camera vlan in order to do testing of h1digivideo4 prior to moving it fully into production.

We are leaving the work permit open as Dave will be removing more of the old conlog machines tomorrow.

At this point we have not removed analog video equipment.  Dave has been making sure we have good drawings of the current setup before we dismantle anything on the analog side.