After the ETMx Glitch Lockloss, had the opportunity to address the POP_A Offsets via Sheila's alog (but she also phoned in to walk me through it!)  :) 

• Held ISC_LOCK at PREP_DC_READOUT_TRANSITION
• Took lines 1030 & 1031 of ISC_DRMI.py to TRUE (from false):
  • self.usePRC1 = True  #returned to TRUE after adding new POP_A Pit OFFSET on feb7, 2025
  • self.usePRC2 = True  #returned to TRUE after adding new POP_A Pit OFFSET on feb7, 2025
  • ISC_DRMI.py LOADed
• Entered new OFFSETs for POP_A pit/yaw (which had been 0).  Now they are:
  • H1:ASC-POP_A_PIT_OFFSET = -0.465
  • H1:ASC-POP_A_YAW_OFFSET = -0.557
• ACCEPTED the new POP_A OFFSETs in the ASC safe.snap (attached)
• Continued on to Nominal Low Noise
• ACCEPTED the new POP_A OFFSETs in the ASC observe.snap (attached)
• Back to Observing at 0348utc.  Also took a screenshot of all the windows I had up for this change (attached)