Rahul, Betsy, Camilla

Attached are some photos of the proposed location of the beamdump that will be placed behind the HAM1 RM3 / PM1 tip-tilt with new D2500101 attached to existing Tip-Tilt DSUB Bracket Holder D1101430. In reality the beamdump will be placed at the mirror image of the photos as the HAM1 beam will be coming the opposite incoming angle.

The Beamdump is made from: 

• QTY2 D1800140-02 (Beam Dump)
• QTY1 D1000972 (V-holder)
• QTY2 D1100705 (PEEK Set screw #8-32 x 3/16)
• QTY1 C-2010-A 1/4-20 x 0.63" SHCS, Silver plated