I noticed that the 500nm counts were stuck so I restarted the dust monitor (didn't fix the stuck value), and restarted the IOC but it didn't come back after the restart, the dust monitor isn't writing 2 values correctly it seems? I might have to swap this to another dust monitor, I don't have any more spare pumped dust monitors so I think I would want to take one of the 2 currently in stagings' ground floor if possible. I also double checked that all the settings on the actual device were the same as the others. The 0.3 RAW counts seem to be still working confusingly.

The reported error is as follows

2025/04/03 15:16:59.169508 gt521s1 H1:PEM-CS_DUST_LVEA10_300NM_RAW_IN: Input "    ,   ,010,060,000..." does not match format "%*[-0-9]*[:0-9]*ff*f*f*f"