I noted that when installing the black glass in HAM 3 that there was no plan to have a BG plate on AROM RH7 which was added after the black glass plan was made. We elected to use a spare BG plate from AROM RH5 and install it on this optic.
I also noted that three optics (AROM RH3, ROM RH8, and ROM LH3) were attached to the HAM table with only one screw on one side of their base plates. These were originally planned to have clamping forks before the optic height was reduced do to the discrepancy with the sled and ISC bases were used. I installed three dog clamps (D1100640 v1 type 5) on these optics on the sides with missing screws.
SNs were as follows; AROM RH3: SN 14, ROM RH8: SN 15, ROM LH3: SN 16.