david.barker@LIGO.ORG - posted 14:09, Monday 28 April 2025 - last comment - 07:35, Tuesday 29 April 2025(84152)
Added progress bars to DAQ Detail MEDM
Jonathan, Dave:
The DAQ detail MEDM has been updated to show FW2's progress within the 64 second cycle for full frames, 600 second cycle for second trends and 3600 second cycle for minute frames.
When each progress bar reaches the end, the next data accumulation phase starts and the frame file writing begins.
A new run_number column has been added, along with a LED stack checking these all agree with each other.
The retransmission column has been removed.
Images attached to this report
Comments related to this report
As a test, I've added a second bar for FW2 showing the time it took to write the previous frame as a diamond. If the time to write exceeds the bar's span, e.g. > 64 seconds for a full frame, I have verified that a half diamond is shown on the right margin.
Images attached to this comment
