After Fil and Richard un-cabled ISCT1, TJ and I added guillotines to HAM1 +Y VPs, removed bellows and attached yellow VP covers. Randy then fork-lifted ISCT1 away from HAM1 and placed it next to IOT2L.
Comments related to this report
camilla.compton@LIGO.ORG - 08:49, Monday 09 June 2025 (84893)
At the end of the day on Friday, Randy fork-lifted ISCT1 back to HAM1. Location and height was adjusted to match markings. We left the yellow VP covers on and bellows off as HAM1 VAC had started pumping.
At the end of the day on Friday, Randy fork-lifted ISCT1 back to HAM1. Location and height was adjusted to match markings. We left the yellow VP covers on and bellows off as HAM1 VAC had started pumping.