Dust monitor 9 briefly dropped in and out of communication three times
Multiple brief EPICS gateway drop-outs reported by the alarm handler

Jim W. taking measurements on ITMX
Cleaning around HAM 6

09:20 Call from gate, answered multiple times loudly, no response. Could hear engine running, but couldn't see anything on the camera through the fog. They eventually hung up and did not call back. They may have been here to pick up the trailer, which was scheduled and is now gone.
09:39 Betsy W., Travis S., getting ready to go to end X to take in chamber pitch measurements of ETMX
09:41 Small clean room moved into beer garden, dust alarms on dust monitor 5
09:56 Jeff B. working on OMC in clean rooms by HAMs 4, 5 and 6
10:36 Kyle R. opening GV6, may make loud noise as it cams open
11:35 Dust alarm at end Y may correspond with alarm for Y end cleaning area roll-up door open
11:48 Mitchell R. out of LVEA, was helping Peter K. with cabling near HAM2
13:07 GV6 opened
13:31 Mitchell R. getting parts from the north and west bay of the LVEA
13:31 Jeff B. working on OMC in clean rooms by HAMs 4, 5 and 6
13:45 Mitchell R. done getting parts
13:49 Sheila D. transitioning end X to laser hazard
14:11 Justin B. transitioning the LVEA to laser safe
15:00 Safety meeting
15:57 Jeff B. working by electronics rack at HAM6
16:01 Dave B., Jeff K. restarting reverted h1susim model