Dust monitor 9 briefly dropped in and out of communication three times Multiple brief EPICS gateway drop-outs reported by the alarm handler Jim W. taking measurements on ITMX Cleaning around HAM 6 09:20 Call from gate, answered multiple times loudly, no response. Could hear engine running, but couldn't see anything on the camera through the fog. They eventually hung up and did not call back. They may have been here to pick up the trailer, which was scheduled and is now gone. 09:39 Betsy W., Travis S., getting ready to go to end X to take in chamber pitch measurements of ETMX 09:41 Small clean room moved into beer garden, dust alarms on dust monitor 5 09:56 Jeff B. working on OMC in clean rooms by HAMs 4, 5 and 6 10:36 Kyle R. opening GV6, may make loud noise as it cams open 11:35 Dust alarm at end Y may correspond with alarm for Y end cleaning area roll-up door open 11:48 Mitchell R. out of LVEA, was helping Peter K. with cabling near HAM2 13:07 GV6 opened 13:31 Mitchell R. getting parts from the north and west bay of the LVEA 13:31 Jeff B. working on OMC in clean rooms by HAMs 4, 5 and 6 13:45 Mitchell R. done getting parts 13:49 Sheila D. transitioning end X to laser hazard 14:11 Justin B. transitioning the LVEA to laser safe 15:00 Safety meeting 15:57 Jeff B. working by electronics rack at HAM6 16:01 Dave B., Jeff K. restarting reverted h1susim model