I entered the OSEMINF offset and gain values, entered the correct magnet signs in COILOUTF and did a new safe.snap. I had to do this manually because the Matlab script doesn't cope with the fact that the autoBurt.req has three bad lines due to a bug in RTCDS 2.8 leading to the folllowing errors:
H1:SUS-OMC_DACKILL_PANIC.HSV ... not connected so no ca_array_get_callback()
H1:SUS-OMC_DACKILL_PANIC.LSV ... not connected so no ca_array_get_callback()
H1:SUS-OMC_DACKILL_PANIC.LOW ... not connected so no ca_array_get_callback()
I entered the OSEMINF offset and gain values, entered the correct magnet signs in COILOUTF and did a new safe.snap. I had to do this manually because the Matlab script doesn't cope with the fact that the autoBurt.req has three bad lines due to a bug in RTCDS 2.8 leading to the folllowing errors:
H1:SUS-OMC_DACKILL_PANIC.HSV ... not connected so no ca_array_get_callback()
H1:SUS-OMC_DACKILL_PANIC.LSV ... not connected so no ca_array_get_callback()
H1:SUS-OMC_DACKILL_PANIC.LOW ... not connected so no ca_array_get_callback()