Displaying report 1-1 of 1.
Reports until 16:22, Thursday 26 May 2011
X1 SEI
corey.gray@LIGO.ORG - posted 16:22, Thursday 26 May 2011 (856)
BSC (& HAM) ISI Assembly Status

(Corey, Eric, Greg, Hugh, Jeff, Jim, Mitch)

HAM ISI #3

This assembly was removed from the Test Stand, placed in Storage Container, and has left the Staging Building----we now have more room!!

BSC ISI #1

Jeff & Eric pecked away at subassemblies.  Large & Small Actuators are just about done and are on the shelf awaiting installation.  Jeff has just about finished both types of Lockers.

BSC ISI #2

Have installed Adapter Plates on Test Stand, used Tooling to position Boxbeams, torqued down Boxbeams.  We still need to check/adjust level.

Images attached to this report
Non-image files attached to this report
Displaying report 1-1 of 1.