[Rich A, Koji A]

The OMC cables at Rack 5 were checked.

The OMC uses the split variant of the whitening chassis (D1002559) at U18, instead of the installed one.
Rich found the correct front panel module at the EE lab. The new front panel was installed. This allowed us to connect
the DCPD cable (#307 cable) which had been hanging at the side of the rack. (Note to myself: The module should be labeled)

We also found the DB25 cable between U8 and U10 was missing. We brought a DB25 cable from the squeezer remnant.
Cables for Binary IOs are not yet connected. (Note to myself: The DB25 cable should be labeled).

The HV cables are not yet prepared.