I have added a seismic activity bar, similar to the wind speed bar, to the upper right of the CDS Overview. Attached shows the bar during the current earthquake.
Similar to the wind speed, the bar fills from the left, start green then gets increasingly red.
This bar is logarithmic, each point is approximately a factor of about 2.5 from the last. The range is 1.0e+01 to 1.0e+05 BLRMS.
The bar is comprised of circles ("little earths") rather than squares.
DTS Environment Repositioned On CDS Overview.
To make room for the Seismic bar, I removed the DTS environment section. This has now been added back as a "system widget" in the FMCS section (see attached).
The "DTS ENV" block will turn RED if the server room temperature exceeds 80F. The block will turn MAGENTA if the dts_env_ioc GPS time falls behind by 10 minutes or more.
Clicking on the "DTS ENV" block will open the DTS Detail MEDM (attached).
