After Apollo removed the dome and erected the work platforms, Jim went up and locked the ISI.  Travis and I then went into the chamber, pulled the witness plates that needed pulling, clamped the ETMx QUAD masses, put PETG face caps on the 2 critical optic surfaces, and covered the QUAD with a C3 bag.  The bag is tied to the QUAD and bundled at the bottom so it is secure and out of the way for the cartridge flight.  So, SUS is done in there - TMS folk are up next, as are de-cablers (all teams? or mostly Jim...).  I left a small SUS tool pan in the chamber for everyone's use.