Displaying report 1-1 of 1.
Reports until 17:08, Monday 01 December 2025
LHO General
ryan.short@LIGO.ORG - posted 17:08, Monday 01 December 2025 (88294)
Ops Day Shift Summary

TITLE: 12/02 Day Shift: 1530-0030 UTC (0730-1630 PST), all times posted in UTC
STATE of H1: Planned Engineering
INCOMING OPERATOR: None
SHIFT SUMMARY: Busy day upgrading DAC cards at EY. After suspensions were recovered, we wanted to relock the IFO to ensure the new DACs haven't introduced a problem, so I started an initial alignment. Unsurprisingly, ETMY and TMSY needed quite a bit of adjustment, but otherwise alignment went smoothly. Locking the IFO presented a couple of issues; after DRMI locked, I needed to turn of the SRC1_P loop as it appeared to be pulling alignment away. I turned this off again during ENGAGE_ASC_FOR_FULL_IFO as it appeared to be misbehaving for the second time. Eventually H1 lost lock during MOVE_SPOTS, but we're unsure as of yet what the cause was. H1 is attempting to lock again under the supervision of a few folks still here in the control room.
LOG:

Start Time System Name Location Lazer_Haz Task Time End
15:46 FAC Eric FCES N Checking air handler 16:19
16:12 FAC Nellie MY N Technical cleaning 17:01
16:16 FAC Kim MX N Technical cleaning 16:56
16:27 CDS Fil EY N AI chassis modifications 20:50
16:46 FAC Tyler, McD Miller FCES N Air handler fix 19:19
17:01 FAC Kim H2 N Technical cleaning 17:12
17:12 FAC Nellie Opt Lab N Technical cleaning 17:29
17:52 CDS Daniel CR N Beckhoff updates 19:19
17:52 SEI Jim Remote N Testing on HAM6 ISI 19:52
18:20 ISC Kar Meng Opt Lab Local OPO work 19:18
18:52 PEM Rene, Alicia CER N Moving magnetometer 19:02
20:21 CDS Dave EY N DAC card replacement susey 20:50
20:25 TCS RyanC MER N TCS chiller checks 20:32
20:36 AOS Betsy Opt Lab N Rearranging parts 21:28
20:44 JAC Jennie LVEA/Prep Lab N Grabbing parts then JAC table work 21:42
21:12 CAL Tony PCal Lab N Measurement setup 21:19
21:13 ISC Kar Meng Opt Lab N Looking for electronics 21:28
22:05 ISC Jennie LVEA/Prep Lab N JAC table work, maybe getting more parts 22:33
22:32 FAC Tyler Hi-bay N Loading scissor lift into hi-bay 23:30
00:47 PEM Rene, Alicia CER N Moving magnetometer 00:54
Displaying report 1-1 of 1.