Because there was some confusion about the mechanical states in the corner station, I'm posting a summary of things as they stand today. The only HEPIs that are locked are HAM1,2 and BSC2, and HEPI Isolation are still bypassed. The white board in the control room says HAM1-4 are locked, this is not true. I have re-enabled the isolation loops for HAM3 HEPI (set H1:HPI-HAM3_ISO_GAIN to 1) and set HAM3  SEI back to ISOLATED. HAM1&2 HEPI are still bypassed. HAM1 & 7 ISI are also still locked.

HAM1,2, BSC2 HEPI - LOCKED, BYPASSED

HAM1,7 ISI - LOCKED

Everything else should be able to be run as normal.