TITLE: 03/05 Day Shift: 1530-0030 UTC (0730-1630 PST), all times posted in UTC
STATE of H1: Planned Engineering
INCOMING OPERATOR: None
SHIFT SUMMARY:

The arms were opened up today! 

• And this afternoon, we started work on the green arm alignment and after about 2-3hrs Jenne got both arms aligned with WFS (not with spool cameras).  Woo Woo!  
• Alignment work on JAC in-air table also started in the afternoon.

I got pulled from my shift for a good chunk of the 2nd half of my shift, and so Ryan Short helped me out and will post about afternoon LOG of activities. 

LOG:

• 1551-1651 LVEA technical cleaning (nellie.kim)
  • 1654-1741 MY/FCES cleaning (nellie)
  • 1700-1807 MX cleaning (kim)
  • 1808 H2 room (kim)
• 1551-1603 Hauling parts into East Bay (randy)
• 1605-1632 EY cleanroom curtains (randy)
• 1644 First Contacting BHD optics (camilla)
• 1710-1735 Unlocking HEPI of BSC2 (jim)
• 1723-1729 Checking HAM1+7 (travis)
• 1720-ish Cabling up ISCT1 & IOT1 (marc.fil)
• 1739 tour (kissel)
• 1751-1807 IOT1 work (daniel.jennie)
• 1753 CHETA table alignment (sophie)
• 1806-1809 grabbing a dust monitor in cer (ryanC)
• 1806-1816 checking elevator arm in east bay (randy)
• 1813-1822 turn off turbo H7 isolate aux cart H2 (jordan)
• 1815 wipe off optics table for BHSS in optics lab(oli)
• 1820 chatting w/ fil at isct1 (richard)
• 1830-2000 Moving BHSS from Staging to Optics Lab (elenna,mitch,betsy,corey)
  • ...RyanS covered Ops during this time & for a good chunk of the rest of the afternoon  (THANKS, dude!)
• 2046-2059 continue elevator arm work in east bay (randy)
• 2119 Checking electronics for JAC wfs at the rack (daniel)
• 2122 Working on IOT1 (new little JAC table) to look for beam (jennie.jason)
• 2140 HAM1 relay work & climbing around HAM1 (gerardo,fil)
• 2115-0020 Green arm alignment (jenne, I wrote down the steps she took & will post later...probably in the wiki)