All the h1susb13 models stopped with timing errors this afternoon, followed later by h1psl0's iop model. CER activity was ongoing around this time.

We tried a model restart on h1psl0, which did not work. We rebooted the machine and all started OK.

We tried a reboot of h1susb13, but it got stuck. We then hard-reset the computer via IPMI and all came back OK.

Following the recovery of h1iopsusb13 I untripped the BSC1 and BSC3 SWWDs (the SEI had tripped).

Daniel had a new h1ascimc model to install (no DAQ restart). We stopped h1ascimc, which caused a DAC error on h1iopasc0. So as before, we had to restart all the h1asc0 models to load a new h1ascimc.