Erik, Dave:

I have built and installed Oli's first versions of the HAM6 SUS models: h1susom0, h1susobs, h1susam, h1susomcab, h1susom1ab, h1susom2ab and h1susom3ab.

Currently h1sush6 is running without Dolphin IPC and is not connected to the DAQ. Therefore to get this early running I edited the models and removed the remaining H1:LSC-TRIG_IFO_PCIE part from the om0, obs, am, om[123]ab models.

Only the iop model is in puppet, so I had to also do some hand editing of the rtsystab file to get the models to start.

I made a temporary edit to generate_cds_overview.py to add these models to the CDS Overview. To make space I simply stretched the window vertically. I'll reorder the lower section so the SUS column can take the full window height (also additional models will be added to h1sush5 and h1susb2h34).

Next week we will put all of this into puppet and add these models to the DAQ.