Betsy informed me that the commissioners were done with the peek along the X-arm and I closed GV7, once again it does not want to hard close, currently sitting at "soft close" with 50 psi of instrument air in an attempt to close it.
I tried increments of 10 psi with the new regulator, I took the pressure up to 90 psi, and it sat there for about 30 minutes, no luck closing.  Probably the gate valve is not "hard closing" due to the leaks within the gate valve's piston system.
I've set the pressure down to 50 psi and left it and maybe it will hard close, with the leaks present lots of air is wasted.  Also, this configuration allows for crane usage along the XBM from now on.