Jeff, Josh, Erik, Dave:

We started the h1spih23 model for the first time on h1seih23 at 15:51 Fri 03apr2026. It has been allocated dcuid=187.

Erik added this model to CDS puppet. I did a build, rev-update, build-rev-locked and install. Erik then started the model on h1seih23 with no problems.

h1spih23 has not been added to the DAQ, therefore it is missing its DAQ channels and has a bad DAQ status.

h1spih23 runs at 32K. It has 5 SHMEM IPC senders running at that rate. SEI receivers will be added at a later date.

I have added h1spih23 to the CDS Overview (some hand editing was needed since it is not in the DAQ running config yet).

Next week we will add this to the DAQ.