WP13189

Camilla removed the bellows yesterday (alog89994), so Randy and I moved the IOT2(ISCT2) table away from HAM2 and over closer to HAM3 on the +X side of the garb room there. This seemed like the most out of the way place while thinking ahead with door moves. The markings on the floor from 3/25 were still relevant, so I didn't mark anything new. Table height is marked with a label on the table, and again still relevant so I didn't change anything.

I then fixed up the curtains and turned the cleanroom on. Counts were below 100 right then, so it's looking good so far.