I connected the temp cables which Fil routed for us to the BS Satellite Boxes in the rack in the biergarten.  I disconnected the "to chamber" cables on the Sat amps and connected our temps to those.  After some resorting of the BS Top Stage BOSEM cabling at the ISI, I was able to get the appropriate signals from the appropriate 6 BOSEMs on the medm.  
I am not sure that we will reuse these cables but for the record (since I couldn't find an old BS alog with this info), the Cable Bracket on the ISI is stuffed with these D1000225 cables:

S1106798 Against ISI (Top floor) - BS F1, F2, F3, LF
S1106797 Middle floor - RT, SD
S1104787 Lowest floor - M2 - medm no longer connected tho, says Oli - not plugged in right now anyways

We have more trending to do tomorrow but the F1, 2, 3 Face BOSEMs seem to be "in deeper" while the LF, RT, SD DOFs all show about nominal OSEM position from when it was in the chamber a few days ago.  Chewing on what this means wrt the structure position and ISI/Test Stand level, etc.