Ibrahim, Randy, Betsy, Rahul

Today, we:

• Prepared the BSFM for test stand removal which involved taking off some wire baffles, loosening dog clamps and wiping down the BSFM platform (LSAT).
• Set a perimeter for BBSS to go up (in same position) using dog clamps.
• Installed and fit-check the 45 deg. lifting bars - the screws seemed to be too long so we used 2 nuts to back them out.
• Brought the aluma lift in to pick up the suspension and lifted it out of the test stand smoothly. 
• Rested it in the cleanroom on the LSAT with some dunnage blocks.

See pictures