Ibrahim, Betsy, Randy

Today, we:

• Took the BBSS out of the can after securing the BSFM.
• Prepped the BBSS
  • blew the suspension with nitrogen top gun from top down
  • took the lifting plates out and set it down on its assembly tooling
  • attached the 45 degree lifting arms
• Prepped the ERGO arm
  • 2 adjustment O-rings had to be re-installed
  • BBS plate was used to lift practice glass
  • Dry run of where it would go with the optic was done
• Prepped the Aluma-Lift
  • cleaned the lift arms
  • positioned and dry-ran the path it would take during install 

Particle counts were checked periodically and were under 75 consistently during acitvity

See pictures.