Following the DAQ restart to service the h1sushtts model change, I noticed that h1lsc DAQ status changed to 0x2000 (new ini file). I pressed the "DAQ Reload" button on h1lsc which cleared the error, and then realized that there is most probably a mismatch between the lsc model and its INI file. True enough, the model was started on Tue 17th but the model was changed and a "make install" issued Wed 18th. At this point the lsc data is most probably corrupted in the frame.
I restarted the h1lsc model to bring the software and the INI file back into synchronization.
Mea culpa. The LSC model was rebuilt to fix the channel names of its antiwhitening switches, but I postponed the restart since the model was in use last night. Thanks for taking care of it.