Jim, Shoshana, Alexandra, Arnaud

Today we continued setting up the H2-PSL lab to start the testing the HOQIs.

* Received and moved the laser system (RIO+Laser Driver+TEC), and readout (HOQI TIA) in the H2-PSL (see picture 1) 
* Gathered needed electronics from the EE shop (See list below) and plugged them in the lab
* Bagged and tagged the peek HOQI components from VPW (waveplate holders, photodiode holders, in-vac cables)
* Visually inspected the new batch of 10 flexures after c&b (see picture 2), and brought them to the H2-PSL (no issues found so far)
* Started setting up the Panasonic optical readout for CRS balancing. We will need some basic components from the optics lab to hold this readout.

Items borrowed from the EE shop :

x2 GWINSTEK power supply
x1 Hewlett P power supply
x1 multimeter with probes
x1 Techtonik oscilloscope 
x1 Bnc banana plug
x4 bnc to clips
x4 bnc cables
x1 db9 cable
x3 power cables
x3 breakout boards (x2 db9 and x1 db25)
x3 db9 gender changers