h1susbs is now fully running the BBSS and everything that was previously on the h1suslo12 model was moved over. The channels that were previously called SUS-BBSS are now called SUS-BS. Old SUS-BBSS data can still be grabbed by using nds2.

I unpaused the BS guardian and took the suspension to DAMPED. It is damping.

/opt/rtcds/userapps/release/cds/h1/medm/SITEMAP.adl
r35324
- Removed BBSS(temp) and updated link for BS

/opt/rtcds/userapps/release/sus/h1/medm/susbs_overview_macro.txt
r35325
- Copied over susbbss_over_macro.txt and updated optic name and dcuids

/opt/rtcds/userapps/release/sus/common/medm/bbss/SUS_CUST_BBSS_QOSEM_OVERVIEW.adl
/opt/rtcds/userapps/release/sus/common/medm/bbss/SUS_CUST_BBSS_M3_OPLEV.adl
r35327
- Removed temporary 'lo12' filled in optic names and replaced with $(optic)

/opt/rtcds/userapps/release/sus/h1/filterfiles/H1SUSLO12.txt
/opt/rtcds/userapps/release/sus/h1/filterfiles/H1SUSBS.txt
r35326
- Copied over previous BBSS filter files into H1SUSBS (with name change from BBSS -> BS)
- Committed updated H1SUSLO12 filter file (which has no filters loaded, which is correct)

/opt/rtcds/userapps/release/sus/h1/burtfiles/h1susbs_down.snap
r35329
- Copied opt/rtcds/lho/h1/target/h1suslo12/h1suslo12epics/burt/safe.snap over to /opt/rtcds/userapps/release/sus/h1/burtfiles/h1susbs_down.snap, which due to symlinks gets linked over to opt/rtcds/lho/h1/target/h1susbs/h1susbsepics/burt/safe.snap
- Loaded BS sdf from safe.snap and 'reverted' changes to get the model to put in the correct settings