Eric, Ryan S, Camilla

Went onto SQZT7 and checked on the M^2 profiler. It needed their alignment procedure ran but as we're aren't at a set alignment we did not do this yet.

In the control room we used the ASC set up in 88777 and had to adjust the H1:SQZ-ASC_TRIGGER_THRESH_ON/OFF, it worked well when we changed PSAMS but we then realized we needed a ZM4/5 ASC rather than a ZM5/6 ASC for SQZT7 profiles. Tried just changing the output matrix, did not work. 

Strangely, when I used the SQZ IFO ASC screen's "!graceful clear history", we now have outputs in the LOCK OUTPUTs but the beam looks a lot clearer on AS_AIR camera. We are now in a different alignment than we have been, but it's better on AS_AIR so we'll reassess tomorrow...