WP13303 Reimage PWRCS Beckhoff, update Corner HEPI Pump controller INI

Patrick, Erik, Jonathan, Dave:

Patrick created a new H0EPICS_PWRCS INI file. All of the EPICS channel names have changed since the first version of this system, and 40 of the new channels have old-channel equivalents. To preserve recent minute trends, the data acquired so far were transferred to the new names as part of the upgrade.

The sequence followed was:

 - Remove the old names from the edc_green_ioc IOC. 43 disconnects at this point (40 from H0EPICS_PWRCS and 3 from H1EPICS_HEPIPUMPL0)

 - Create the copy scripts to be ran on TW0,TW1 to copy the old files to the new, so that the new channels will "continue from where we left off"

 - Create the new H1EDC.ini and verify its changes.

 - Stop daqd on TW0 and TW1

 - Run the copy scripts on TW0 and TW1

 - Restart the 0-leg, followed quickly by restart of the EDC.

 - Wait till 0-leg was fully operational, including TW0

 - Restart the 1-leg

All went well except for the usual GDS1 needed a second restart, FW1 restarted itself after 5 minutes.