Per WP 13415 I finished migrating the dust monitors and the dewpoint monitor to the IOC cluster (service-host 0,1,2).  With this I was able to turn off the old h0epics server.  These will now auto start after power outages as well as there are no manual steps in the startup sequence.

One note.

The dewpoint monitor held its files in /ligo/lho/h0/target.  As a limit in the container I am running these in it wants the command that is executed to be under /opt/rtcds.  So I copied the target area over to /opt/rtcds/lho/h1/target and put a symlink in on /ligo/lho/h0/target/dewpoint.