Followed instructions in 68391 with 2 minute 2W CO2 blasts. Last done in 80834. Starting location with pico H1:SYS-MOTION_C_PICO_G_CURRENT_X,Y_POSITION at (0,0) starting hws plot attached. Aim to center on ITMY, center marked by origin cross using RH in 91567 went to that O4 SR3 alignment for this test. Endign picos are at (2000,0), ending hws plot attached. 

Reverted SR3 to new location. 

Once we know location of IFO beam, we should touch this up again.